SkyRC e660 is capable of charging all battery types, at home, in the office or out in the field. DJI batteries for the Mavic Pro batteries can be charged, using the optional charging cable (SK-600023-06), which needs to be purchased seperately.
SkyRC e660 is a high-performance, micro processor control charge/discharge/power supply with battery management suitable for use with all current battery types. It is with integral equalizer for six-cell Lithium-Polymer (LiPo), Lithium iron phosphate (LiFe), Lithium-ion (LiIon) and Lithium High Voltage (LiHV) battery with max. 6A charge current and 60W charge power. This charger can be powered by 11-18V DC or 100-240V AC power source via the built in switch-mode power supply.
This new e660 charger also support PC control software (Charge Master) and firmware upgrade. Besides that, e660 is able to power DC equipment such as tyre sander, LED pit light and motor checker, etc.
Charge Master software download: https://www.skyrc.com/index.php?route=product/product/download&download_id=28
SkyRC e660 60W AC/DC Balance Charger/Discharger/Power Supply
Optimized Operating Software
SkyRC e660 features the so-called AUTO function that sets the feeding current during the charging/discharging process. It can prevent explosion from overcharging caused by the user, and charging process will be disconnected automatically once malfunction is detected. Its entire programs are controlled through two-way linkage and communication to achieve maximum safety. All the settings are configurable.
Battery Memory (Data Store/Load)
Up to 10 different charge/discharge profiles can be stored for your convenience. You can keep the data pertained to the program setting and call out them at any time without any special procedures for continuous charging/discharging.
Terminal Voltage Control (TVC)
End voltage is adjustable for professionals only.
PC Control Software “Charge Master”
“Charge Master” will offer you unparalleled operating experience through a computer. Real-time charging process will be presented as graphs. You can also monitor pack voltage, cell voltage and other data during the charging process. Initiating, charging control or firmware upgrade is available through “Charge Master”, you are free to download on SkyRC official website (www.skyrc.com).
Internal Independent Lithium Battery Balancer
SkyRC e660 employs an individual-cell-voltage balancer. It's unnecessary to connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the charging process, SkyRC e660 can automatically monitor and balance each individual cell of the battery. Error message will be indicated and the process will be ended immediately if the voltage of any single one cell is abnormal.
Adaptable to Various Type of Lithium Battery
SkyRC e660 is capable of charging/discharging types of Lithium batteries, such as LiPo, LiIon, LiFe and high voltage LiPo battery (LiHV).
Fast Charge and Storage Mode of Lithium Battery
Function of the two modes differs from each other. “FAST CHG” minimizes battery charge time, while “STORAGE” has the capacity to control the final battery voltage, which is necessary and helpful for a rarely used battery.
Re-peak Mode of NiMH/NiCd Battery
In RE-PEAK mode, the charger can peak charge the battery once, twice and three times in a row automatically. This is for confirming the battery is fully charged.
Delta-peak Sensitivity for NiMH/NiCd
After setting the Delta peak sensitivity, when the battery voltage exceeds the threshold, charging process will be terminated automatically.
This charger supports cycle charge>discharger or discharge>charge for up to 5 times. This function is extremely beneficial to a rarely used NiMH/NiCd battery, which can help refresh and activate your battery.
Automatic Charging Current Limit
Upper limit of the charging current can be set when charging your NiMH/NiCd battery. It's useful for a NiMH battery with low impedance and capacity in the “AUTO” charging mode.
LiPo Voltage Battery Meter
SkyRC e660 supports checking battery total voltage, highest voltage, lowest voltage and each individual cell voltage without external battery meter.
Battery Internal Resistance Meter
SkyRC e660 supports checking battery total resistance and each individual cell resistance without external resistance meter.
Charging capacity will increase as the charging goes on. If the charging capacity exceeds the limit, the charging process will be terminated automatically when it reaches the limit you set.
Battery internal chemical reaction will cause the battery temperature to rise. When the temperature limit is reached, the process will be terminated.
This function is available by connecting optional temperature probe, which is not included yet.
Max. charging time can be set to avoid any possible defect caused by overcharging.
DC Power Supply
Your e660 can supply DC power up to 60 Watts. You can use it to power devices that require DC power. It converts standard household power from 100-240V AC to 13.8V DC.