The TX805 is another good video transmitter from Eachine, designed specifically for FPV.


Offering SmartAudio, you can make changes on the fly, using your radio and goggles. Essential for when you're out in the field and need to make adjustments quickly.


PitMode allows you to make changes, without impacting on others around you, which is ideal for race days. The low power consumption means the strength of signal reaches approximately one metre.


Offering you the possibility of using either linear or polarized antennas, the MMCX connector increases your range of options. Plus, you can choose the extension with either an SMA or RP-SMA connector at the end.


Eachine have a good reputation for the quality and price point of their products, and the TX805 is no exception.

Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter TX PitMode/SmartAudio

  • Specification:
    Brand name: Eachine
    Item name: FPV Transmitter VTX
    Channels: 40CH

    Input  voltage: 7V~24V 
    5V camera supply: 120mA(MAX)----25mW@12V
    5V camera supply: 200mA(MAX)----200mW@12V
    5V camera supply: 300mA(MAX)----600mW@12V
    5V camera supply: 350mA(MAX)----800mW@12V
    Extra features: Smart audio
    Power supply: 5V output for Camera
    Output power: 25mW/200mW/600mW/800mW switchable
    Antenna connector: MMCX
    Cable connector: Solder pads
    Dimensions: 36mm*22mm*5mm,30.5 stackable hole
    Weight: 8g(excluding antenna)

    1. Pitmode
    2. Support Smart audio
    3. 40 channels with MIC
    4. Power failure memory
    5. 25/200/600/800mw power switchable
    6. Support OSD Configuring via Betaflight FC
    7. One button frequency and power setup
    8. 7-24V wide input voltage with 5V for camera,12V typical corresponding current value:
        25mw-120mA 200mw-200mA 600mw-300mA 800mw-350mA
    9. Solid MMCX antenna connection and MMCX brass dipole antenna 
    Button control Channel select mode
    Channel select
    Select channels by simple short presses.
    Blue LED light on stands for CH1,short presses to change 8 channels sequentially.
    For CH2/3/4/5/6/7/8,Blue LED flicker once,it won't light on.
    Notice:Blue LED only light on for CH1


    Band select
    Press button for 2S,Red LED will flash,then short presses to select 5 bands.


    Power select
    Press button for 4S,Red LED will flash,then select power by simple short presses to select 25mW/200mW/600mW sequentially,For 200mW, Green LED flicker once,it won't light on;For 600mW Blue LED flicker once,it won't light on .Press the button again ,Red LED,Green LED and Blue LED lights together,Represents the highest power 800mW.
    Notice:Red LED only light on for 25mW.


    Pit Mode(0.01mW)
    While in Pit Mode you can change channels and set power levels , but none of these changes will take effect until you quit Pit Mode.By default ,Pit Mode will send a very weak signal.
    Two ways to exit pit mode:
    Press button 12S until all 16 LED turned off and light on again to exit pit mode,or you can exit pit mode via Betaflight OSD.
    Notice:The VTX has memory for settings,To change the settings ,please repeat steps as above.

    Package includes:
    1 x Eachine TX805 5.8G 40CH 25/200/600/800mW FPV Transmitter VTX 
    1 x Adapter connector cable 
    (RP-SMA or SMA Female)
    1 x MMCX Pigtail Antenna
    1 x Instructions


    NB This item is shipped, flat-packed, within a large padded envelope.

1st class or Special Delivery  -  fast & free UK shipping  -  on all products


Prices include VAT

Created by Light Limited (03846870) VAT GB207237332

West Yorkshire based, UK company

Secure online payments